Harbor Freight Tools Watch Case Opener Handbuch PDF herunterladen (Seite 2)

1. Set the watch face-down on a soft, non-scratch surface.

Select the proper pin type for the watch to be opened.

2. Count the number of notches on the back of the watch cover.

3. While keeping the watch still, twist the handle counterclock-

wise. If the watchband obstructs turning, reposition the

opener as stated above and turn again.

4. Tightening is the reverse of removal.

Is even (2,4,6,8):

a. Insert two of the type of pin

you selected above into the

two pin holders near the end

of the opener, one on each

side.

b. Align the two side pins with

two notches on opposite

sides of the case.

c. Push the top of the center

wheel forward until the case

is gripped by both pins.

Is divisible by 3 (3,6,9,12):

a. Insert three of the type of pin

you selected above into the

pin holders on the opener.

b. Position the watch case with

a notch directly at the bot-

tom.

c. Align the two side pins with

the two notches an equal

distance from each other

and the notch at the bottom.

Push the top of the center

wheel forward until the pins

fit into the two notches.

d. Turn the handle clockwise

until the case is gripped by

all three pins.

If the number of notches...

Operation Instructions

1 2

Keine Kommentare

Harbor Freight Tools Watch Case Opener Handbuch Seite 2