Harbor Freight Tools 92863 Bedienungsanleitung PDF herunterladen (Seite 15)

3. NOTE: The Generator features an AC Non-Fuse Circuit Breaker (34) to protect

the AC circuit in case of an overload. Should an overload occur the Circuit

Breaker will “trip”, causing the Generator to automatically shut down. In this

case, refer to Step #1. Then, reset the circuitry system by depressing the Circuit

Breaker. Restart the Generator and continue powering the remaining tools and

equipment. (See Figure F.)

4. When finished using the Generator, turn the ON/OFF Switch to its “OFF”

position to stop the Generator. (See Figure E.)

5. After the Engine and Generator have completely cooled, store the Generator in a

safe, clean, dry location out of reach of children and other unauthorized people.

120 VOLT OUTLET (35)

CIRCUIT BREAKER

(34)

FIGURE F

INSPECTION, MAINTENANCE, AND CLEANING

1. NOTE: Preventative maintenance procedures and frequency will vary depending

on the amount of Generator use. Refer to the

Engine manufacturer’s Operation,

Maintenance, and Parts manual

(included) for detailed information regarding

maintenance of the Engine.

2. CAUTION! Always make sure the ON/OFF Switch is in its “OFF” position.

Disconnect the spark plug wire from the engine. And allow sufficient time

for the Engine and Generator to completely cool before performing any

inspection, maintenance, or cleaning.

SKU 92863 For technical questions, please call 1-800-444-3353. PAGE 15

1 2 ... 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Harbor Freight Tools 92863 Bedienungsanleitung Seite 15